小型多功能提取罐的工作原理:
将配制好的药材投入提取罐内,一次性加入5-10倍药材量的溶媒(溶媒性质及加入量按工艺要求)浸泡一定的时间后,提取,开启蒸汽阀加热,一般采用夹套加热,(直通蒸汽加热仅水提及提取芳香油时用)经过设定时间煮提后,即可将较高温度的提取液连续从提取罐底部经过滤网粗过滤后至过滤器,进入小型多功能提取罐的浓缩器。
为了提高效率,可用泵强制循环,使药液从罐下部通过泵吸出再缸上部进口回至罐内,解除局部沟流。
In order to improve the efficiency, the pump can be used to force circulation, so that the liquid medicine is sucked out from the lower part of the tank through the pump, and then the upper part of the cylinder is imported back into the tank to relieve the local channel flow.
提油:先把含有挥发油的中药和水加入提取罐内,打开油分离器的循环阀门,调整旁通回流阀门,开供给热源阀门达到挥发温度时打开冷却水进行冷却,经冷却的药液应在分离器内保持一定高度使之分离,再个油水分离器轮换使用。
新溶剂从上到下通过药材层溶解药材中的可溶物到提取罐底部,又被抽入浓缩器内。重复上述过程,从而形成的溶剂经提取-浓缩(回收)大循环经返多次后,提取液呈无色,此时,提取液停止抽入浓缩器。浓缩器继续进行浓缩,直至达到需要比重(1.1-1.25)的流浸膏,放出备用。
回收油精: 将酒精加入缸内,给蒸气打开冷却水,再打开回收阀门即可。用于对中药材以水活有机溶媒为介质在搅拌状态下进行煎煮提取活热回流提取等工艺过程。并可在提取过程中,同时回收挥发油成份。
Add alcohol to the cylinder, turn on the cooling water for the steam, and then open the recovery valve. It is used for decocting, extracting, refluxing and other technological processes of Chinese medicinal materials in stirring state with water-active organic solvent as medium. The volatile oil can be recovered simultaneously in the extraction process.
小型多功能提取罐对大批量药材有效成份提取效率高;节约能源,有效成份提取更充沛提取液含药浓度较高。作业原理: 设备的整个提取进程是在密闭可循环系统内完结,可行常压提取,也可带压低提取、无论是水提、醇提、提油或作其它用处,其具体工艺要求均有中药厂根据药物功能要求自行切出。
转载请注明本文地址:http://www.bjtiqu.com